The
REA ScanCheck 3 is a universal, battery-operated,high-performance bar
code verifi cation device which operates in accordance with current
standards. The verifi cations document compliance with quality goals in
production and monitoring of bar codes on data storage devices and
products of all kinds.
The
measurement principle is based on a laser scanner optimized for verifi
cations. This makes contact-free measurement, largely independent of
handling infl uences,possible. For mobile use on site, the device
operates self-suffi ciently, independent of the power network with
standard, rechargeable batteries. The operating system and application
software support multiple languages.
For
quick creation and evaluation of verifi cations and their comprehensive
display, the unit is equipped with a powerful 32-bit processor, a
brilliant color graphic display and tone generator. Measurement data can
be saved internally in fl ash memory and/or immediately printed out via
the USB interface with the mobile report printer. Data can also be
transferred via network communication to a standard PC and processed
there further with the – optionally available – REA TransWin 32
evaluation software.
With
REA Verifi ers, you will fi nd out why the read rates of codes are low.
Use it to learn how the print quality of the codes can be evaluated and
optimized, using the detailed measurement results.
Optional hardware accessories:
REA TD-GPT-U Report printer
This portable, graphics-capable thermal printer can be connected to the
REA ScanCheck 3 to print out verifi cation reports via a USB cable. The
printer has its own LiIo battery. 57mm-wide thermal paper rolls are
used for printing.
Adapter for measurements with 20 mil
For measurements of very large codes, such as ITF 14 on shipping labels
or cartons, the possible measurement width can be widened to 175 mm and
the measurement aperture enlarged to 20 mil (0.5 mm).
Extension plates
2 different guide plates are available for better handling when
verifying labels on thin fi lms, for example, or on curved or raised
surfaces or on cartons. These can simply be clipped onto the base flap.
