UV curing tester UV CURE CHECK
The UV CURE CHECK UV curing tester is used on the paper receiving table of printing machines to facilitate the detection of the curing status of ink and coating layers. It determines the degree of curing by measuring the sliding friction coefficient. The working principle is based on the variation of friction coefficient, providing a quantitative evaluation of the curing degree of UV ink and varnish. This instrument is compact and portable, powered by batteries, with high measurement accuracy, an error of less than ± 10%, and a measurement time of only about 5 seconds.
For the paper receiving station of the printing machine, the UV CURE CHECK UV curing tester can easily help you understand the curing status of ink and coating layers on printed materials. let
You are more likely to confirm the degree of solidification than before.
application
1. Measure the drying and curing degree of UV ink
2. Measure the drying and curing degree of UV light oil
working principle
1. Determine and display the sliding friction coefficient between the ink or gloss coating together
2. The sliding friction coefficient refers to the degree of curing of ink or gloss coatings
3. The calculation of curing rate is based on the comparison of the sliding friction coefficient of the fully cured sample with the sample during printing to generate a comparative value
Technical Documentation
Measuring principle
The determination of sliding friction coefficient is based on the friction coefficient generated by the surface of the ink and gloss coating
proofreading
First, turn up the energy of the lamp (the output energy of the larger lamp and the slowest printing speed), and then
The friction coefficient obtained from the UV curing tester is a highly curable data
Measurement error: Repeated single measurements less than ± 10%
Measurement time: approximately 5 seconds
Display screen: Display two lines of messages, 15 × 52mm
Instrument volume: 350 × 105 × 90mm
Weight: Including friction kit 1100g
Power supply: Operated by batteries: 6 1.5V or plugged into the power supply using a power supply cable
Automatic shutdown: automatically shuts down after 10 minutes of no use
Product packaging content
measuring instrument
battery
power cord
Storage box and 10 replaceable friction plates
